Allied S795 TSL Specifications

8 Safety Decals These decals are located as shown on the Decal Location diagram and the Sub-Frame Assembly diagram. 1. Read Operator's Manual

10 General Instructions and Information As with any piece of equipment, the care with which your loader is operated and maintained will greatly a

11 Operation and Maintenance GENERAL Refer to tractor Operator’s Manual for Operating information on the tractor’s hydraulic system. Hydraulic

12 Operating Suggestions for Loading When handling heavy loads, be sure to lower lift arms slowly. This is known as feathering the hydraulic lever

13 Operating Suggestions For Backfilling DO THIS! When backfilling approach pile with a flat bucket. Leave dirt in bucket. Dumping on each pass w

14 Attaching the Loader to Your Tractor 1. Position the tractor as centrally as possible and drive, using lowest gear possible, into the loader fr

15 Attaching the Loader to Your Tractor (Continued) 6. When the hook is lined up, dump or roll back the bucket to lower or raise the subframe upri

16 Removing the Loader from Your Tractor WARNING! When removing the loader, it must be fitted with a bucket or other suitable attachment to give

17 Removing the Loader from Your Tractor (Continued) 4. Roll back the bucket slightly and simultaneously extend or retract the lift cylinders to

PRINTED IN CANADA WARRANTY REGISTRATION AND POLICY Buhler Manufacturing products are warranted fo r a period of twelve (12) months from original date

PROBLEM POSSlBLE CAUSE REMEDYLoader slow and/or will not dump. Quick couplers leaking. Check connections and compatibility orreplace.Hydraulic oil too

19 General Notes and Instructions to the Operator Regarding ALLIED HSL Loader Operations 1. The hydraulic self-leveling system (HSL) utilizes two m

20 General Notes and Instructions to the Operator Regarding ALLIED TSL Loader Operations 1. The true self levelling system (TSL) utilizes mechanica

21 Notes

Item Part No. DescriptionRegular QuantityHSL/TSL Quantity S QuantityS795HSL/TSL Quantity1 31411 795 Sub Frame Weldment Left1-- -2 31412 795 Sub Frame

Item Part No. Description795 TSL QuantityS795 TSL Quantity1 24731 795 TSL Mainframe 1 -1 24739 S795 TSL Mainframe - 12 24717 Quick Attach Left 1 13 24

Main Frame Parts TableItem Part No. Description 795 795HSL S795 S795 HSL1 31596 795 Main Frame Weldment 1 - - -1 31595 795 HSL Main Frame Weldment - 1

795 Hydraulic Farm Loader Operator’s Manual Table of Contents Section Introduction and Identification Safety and Pre-use Information O

28 795, S795 Hydraulic Plumbing Diagram

Item Part No. Description Qty.1 24309 3.0 Dia. x 20.75 Cyl. Assy. Bucket 22 24314 3.0 Dia. x 30.00 Cyl. Assy. Lift 23 811572 3/8 x 15" Hose 3/4 M

30 795 HSL, S795 HSL Hydraulic Plumbing Diagram

Item Part No. Description Qty.1 24319 3.5 Dia. x 12.00 Cyl. Assy. Level 22 24309 3.0 Dia. X 20.75 Cyl. Assy Bucket 23 24314 3.0 Dia. X 30.00 cyl. Assy

Item Part No. Description Quantity1 24314 3.0 DIA x 30.00 Cylinder Assembly Lift 22 24708 3.0 DIA x 22.00 Cylinder Assembly Bucket 23812069Tee 3/4-16M

34 795, S795, 795 HSL, S795 HSL, 795 TSL, S795 TSL Hydraulic Cylinder Assembly Description Bucket Cylinders TSL Bucket Cylinders Lift Cylinders L

Buhler Manufacturing “a partnership” 1201 Regent Ave. W. Winnipeg, MB. R2C 3B2 Ph.: (204) 661-8711 Fax: (204) 654-2503 www.buhler.com Printed

3 Pre-delivery Check List Before delivering this equipment please complete the following check list.

4 Loader Identification Diagram (HS

5 Hydraulic (Hose Kit) Identification Diagrams Hose Kit “A” Loader Powered by the tractor remotes. Consists of four hoses leading from loader tu

6 Safety• Never work beneath raised loader unless it is securely supported. The following are instructions for the Lift Lock Supports; -DO NOT US

7 Important Precautions ROLL-OVER HAZARD To prevent serious injury or death:Move and turn tractor at low speed.Carry load no higher than